Focusing on Huaguang Shuangshun's real-time dynamics, what you care about is what we care about.
Precautions for using high-frequency vibration?
Publish Time：
2023-01-03 14:06
With the continuous advancement of science and technology, all walks of life have also developed greatly. The development prospect of high-frequency vibration is also very good, so the demand is increasing, and there are more and more manufacturers on the market. As a manufacturer, it is also very necessary for us to tell you about the precautions for high-frequency vibration. Interested partners can come and have a look.
With the continuous advancement of science and technology, all walks of life have also developed greatly. The development prospect of high-frequency vibration is also very good, so the demand is increasing, and there are more and more manufacturers on the market. As a manufacturer, it is also very necessary for us to tell you about the precautions for high-frequency vibration. Interested partners can take a look together.
Before using this high-frequency vibration, many problems have accompanied everyone. Therefore, to use it better, you need to understand some of its knowledge points. First, you need to clearly check the high-frequency vibration before use. Use a 500-volt megohmmeter to check the motor winding and ground insulation. The value should not be less than 2 megohms. Otherwise, please dry it at 120 degrees with a thermostat. It is also necessary to pay attention to whether the high-frequency vibration motor parts are fixed in place, whether the screws are loose, check them, and then try the machine after confirmation. When testing the machine, the high-frequency vibrator should be placed on a soft object (sponge, etc.), and experiments should not be conducted on a cement floor. The equipment motor shaft can only be installed horizontally, and it is not allowed to be at an angle to the horizontal plane on the template. The vibration motor leads are connected to the cable and fixed to the motor handle to prevent the motor leads from breaking due to motor vibration and cable dragging, causing phase loss and burning out the engine. In addition, if screws are found to be loose during the operation of the high-frequency vibration, they should be tightened in time to prevent water from entering the motor. Check if the power cord is normal; if it is a plug, check if the plug switch wiring is firm and safe, and ensure good contact. Then divide it into sections of 1.2m to 1.5m to ensure that the beams and plates are all within the vibration source.
The high-frequency vibration time is controlled within 2 minutes. If the time is too long, the concrete may segregate, and if the time is too short, the air bubbles in the concrete may not be discharged cleanly. After using the high-frequency vibration, carefully clean the exterior, ensure good heat dissipation, and place it in a dry and ventilated place. In addition, everyone should pay attention to the fact that the fleet must install effective leakage protection equipment and grounding or grounding equipment to ensure its safety and reliability. Or for personnel who need to operate high-frequency vibrators on a daily basis, relevant electrical training is required. Personnel should wear insulated rubber shoes, insulated gloves, and other related protective equipment during operation. For the cables installed on high-frequency vibrators, the required length is met during production operations. High-frequency vibration shall not be used for stacking items or squeezing vehicles, and is strictly prohibited. Use cables to drag or hang vibrators. The company is committed to the expansion and development of domestic and foreign markets, adopting both online e-commerce platforms and offline physical sales. Nowadays, its products are distributed throughout all provinces, cities, and autonomous regions in China. Products are not only popular in the domestic market, but also have contact information on the official website. There are also online customer service personnel to receive you here. If you don’t understand anything, just ask them.
The above is an introduction to the "precautions for using high-frequency vibration". If you still have any questions, please feel free to call us. That’s all for today’s knowledge points. I hope it can help you. Next time, we will bring more information about it.
High-frequency vibration
Real-time Information
Hotline：
Chairman and General Manager：Zhang Yong
Mobile：(0)18905258986
Tel：0514-86501440
Fax：0514-86502418
Address：No. 16, Renmin South Road, Dinghuo Town, Jiangdu District, Yangzhou City, Jiangsu Province
Postcode：225266